IFD44 for Riser Branch Installations – Angle Free for Various Shaft Wall types when Tight to Floor Slab Above

Application:

Riser Branch Installations – Angle Free for Various Shaft Wall types when Tight to Floor Slab Above

This IFD Solution uses an IFD44 and is suitable for 120 minute riser branch installations when mounting is tight to the floor slab above, and is suitable for any commercial or residential situation where fire dampers connect to common riser shaft systems. This solution does not require mounting angles, simplifying the installation process and substantially reducing labour costs.

Installations include offices buildings, schools, apartments, hotels, motels & aged care facilities, where containment of fire / hot smoke is required.

Approvals:

To comply with the Building Code of Australia and referenced standard AS1668.1, Kilargo IFD series IFD’s are fully fire tested to AS1530.4 and air leakage tested in accordance with AS1682.1

Related Standards and Codes: AS1668.1 / AS1530.4 / AS1682.1 / AS1682.2 / AS1851.6

Proof:

Kilargo has conducted an extensive testing program of IFD’S at CSIRO, Exova Warrington and BRANZ registered test authorities.

Approval Ref:

FCO 2436

Approved Product Sizes:

FRL – / 120 / – 300mm x 300mm or equivalent rectangular to 90,000 mm2

For more information and copies of relevant certificates contact Kilargo

Product Fact Sheets: