KP Series intumescent fire and combined fire & smoke seal.
Application
Incorporated into proprietary fire door and life safety door assemblies to provide resistance against fully developed fires where hot flames, gases and smoke are at extreme temperatures.
Key Features
- Utilised in proprietary aluminium bullnose meeting stile sections.
- Decorative and protective PVC outer casing. ‘SS’ version has offset brush pile incorporated into profile to help provide resistance to smoke.
- Ideal for fire engineering solutions where fire (or fire & smoke) protection is necessary.
Use With
Used in conjunction with other Kilargo intumescent perimeter seals and door bottom seals, as tested on typical proprietary fire doors.
Materials
KP3107 intumescent seal with incorporated, offset brush pile.
Gap Size
Minimum 1mm – Maximum 3mm
(Dependent on seal type and application)
This product is usually incorporated into proprietary fire door meeting stile sections.
Sizes
Standard lengths 2100mm, 2400mm, 3000mm
Finish
Silver with black brush pile
Fixing
This product can be fitted into the proprietary aluminium sections of bullnose meeting stiles for double action fire doors.
Approval/s
- Fire tested to AS1530 Part 4 for up to 2 hours on proprietary fire door assemblies in accordance with AS1905 Part 1
